Garbage Disposal Repair & Installation in Addison, TX
A disposal that just hums. Water pooling under the unit onto everything stored beneath the sink. A reset button that pops right back out. We handle every disposal call across Addison's kitchens, from a quick jam clear to a full replacement, same visit.
Addison's Kitchens Are Mostly Apartment-Sized, and That Shapes the Job
Addison is an unusually apartment-heavy town — by the town's own housing data, roughly three-quarters of residents rent rather than own. That means most of the disposal calls we take happen in mid-rise kitchens around Addison Circle and Vitruvian Park, where compact under-sink space and shared building plumbing shape the fix as much as the disposal itself does. The smaller stock of detached homes near Bellbrook Estates and the Surveyor Boulevard area sees more of the classic single-family pattern — an original builder-grade unit finally reaching the end of its service life.
A disposal that hums but does not turn is almost always a jammed impeller, cleared from underneath with a hex key in a few minutes. A disposal leaking from the bottom of the housing is a different story — the aluminum shell has corroded through from the inside, which happens faster in Addison's moderately hard water than it would somewhere with softer supply, and at that point the fix is a replacement, not a reseal. We check which situation we are actually looking at before quoting either one.
For replacements we install disposals sized to the kitchen and the household, along with a fresh sink flange, a new discharge tube, and a check of the P-trap below — because a leak at a connection we did not touch is not a return trip we want to make. If you have already bought your own unit, we will install it and warranty the labor the same way.
Signs Your Addison Disposal Needs a Visit
Some of this list is a ten-minute fix. The rest means the unit has reached the end of the road. We tell you honestly which is which on arrival.
A jammed impeller with the reset button popped out. This is the fastest fix we run — a hex-key clear from underneath usually solves it on the spot.
A cracked internal housing, and it only goes one direction from here. The aluminum shell cannot be resealed, so stop running it and get it looked at before it shorts the motor.
A failed putty seal or a loose mounting ring at the top of the unit — a reseal from above, not a replacement.
Motor overload, either from a stuck grinding chamber or a motor that is simply drawing too much current as it ages. A jam clear is the first thing to try; if it does not hold, the unit is likely done.
Something solid is caught in the chamber — silverware, glass, a stray bone. Shut the power at the switch before reaching for it, or call us to pull it out safely.
Usually the branch drain just past the disposal rather than the unit itself. That calls for a snake on the branch line and a P-trap clean-out, not a new disposal.
Diagnose First, Repair Where We Can, Replace Only Where We Must
You get a straight answer on arrival, not a reflexive push toward a new unit.
- 1Narrow down the actual problem
A stuck impeller, a corroded housing, or a clog further down the branch line each call for a different response, and a quick hands-on check tells us which before anything gets priced.
- 2Work the jam loose by hand
A manual crank from underneath frees a stuck impeller in most cases, followed by resetting the overload and running the unit briefly to confirm the fix holds.
- 3Swap the unit once the shell has corroded
We pick a replacement sized to your kitchen, seat a new flange and discharge tube, and add a septic air-gap fitting when the home's system calls for one.
- 4Confirm the trap and the line below it
Part of every replacement is checking that the P-trap and branch line downstream are actually flowing well. A branch that needs a snake gets one in the same appointment instead of a callback.
- 5Test it and talk you through what changed
A short cold-water run, a dry check of every joint for weeping, cabinet wiped down, and a plain explanation of how to use the reset switch and manual crank going forward.
What Shows Up on the Truck, by Part of Addison
Building type and age tell us more about the likely fix than the brand of disposal does.
Mid-rise condo and apartment kitchens from the late 1990s and early 2000s often run smaller, space-saving disposals under compact prep sinks. Replacements here have to fit tighter under-cabinet clearances than a typical single-family kitchen.
Built through the 2010s, these newer apartment kitchens mostly still have their original disposals in working order. Calls here tend to be a straightforward jam clear rather than an aging unit needing to be swapped.
Larger custom homes from around 1990 in this neighborhood often still run a builder-installed disposal from construction. At this age, a failed housing is a common reason for the call rather than a simple jam.
Homes and duplexes typical of the early 1980s here have usually gone through at least one disposal replacement already. A second unit reaching end of life is a routine call in this stretch of town.
Garden-style apartment kitchens along this corridor tend to run smaller disposals matched to compact cabinetry, similar to the units near Addison Circle.
A handful of 1970s and 80s vintage garden apartments that predate the Vitruvian Park redevelopment are still occupied. Builder-grade disposals from that era are long past a reasonable service life, and full replacement is usually the more sensible call for a property manager than another repair.
What Addison Homeowners Say
Same-Visit Fixes and Upgrades
The truck carries a range of disposal sizes along with the flanges, discharge tubing, mounting rings, sealant, and dishwasher plugs that go with an install, so a jam clear or a full swap both tend to close out in a single stop in Addison.
Aqua Pure Plumbing backs the labor on every install, and the disposal itself carries whatever coverage its manufacturer sets. Licensed through the Texas State Board of Plumbing Examiners, insured, and a family-run operation, we dispatch out of The Colony into Addison on a daily basis.
What Homeowners Ask Before Booking
Our Other Plumbing Services in Addison, TX
A disposal replacement often turns up a corroded P-trap or a slow branch drain underneath. We take care of both on the same visit, on one invoice, anywhere in Addison.
Electronic detection under condo and townhome slabs — reroute options that save your finished floors when possible.
Trenchless replacement for the cast iron laterals under Addison's 1970s and 80s builds — camera first, quote in writing, minimal yard damage.
Acoustic, thermal, and pressure testing to pinpoint hidden leaks in Addison slab, wall, and shared-stack lines without tearing into finishes.
Licensed install, repair, and pressure-testing for Addison homes and townhomes — every line signed off to Texas code and Atmos requirements.
Full-clear service and camera confirmation for the aging cast iron drains under Addison's mid-century ranches and condo blocks.
Repair, flush, and replacement of tank units — including the closet-tucked heaters common to Addison townhomes and Circle-area condos.
Install, service, and annual descaling — Addison's hard tap water eats tankless heat exchangers without it.
same-day, 7 days a week response across Addison for burst pipes, condo stack backups, and failed heaters.
High-pressure cleaning that clears scale, grease, and roots from the cast iron mains under Addison's older stock — full-diameter, lasting clean.
Cartridge, stem, and full-fixture replacement for Addison kitchens and bathrooms — hard-water-ready parts stocked on the truck.
Rebuilds, wax-ring resets, flange repairs, and full replacements — the running toilets and rocking bowls in Addison homes.
Need Disposal Work in Your Addison Kitchen?
Jam clear, leak repair, or a full upgrade — parts on the truck, priced in writing, same-visit install.